Linmodems Mailing list Archives

Mailing-List: contact discuss-help@linmodems.org; run by ezmlm
Sender: marv
Message-ID: <3AA8C847.D0A73BBA@rcn.com>
Date: Fri, 09 Mar 2001 07:10:47 -0500
From: Marvin Stodolsky <stodolsk@rcn.com>
MIME-Version: 1.0
To: Ibrahim El-Shafei <shaffei@mailandnews.com>
CC: LinModem <discuss@linmodems.org>
Subject: Re: modem
References: <20010302012815.14286.qmail@web3003.mail.yahoo.com> <3A9EFA32.1923F0BF@rcn.com> <025301c0a79a$b6dfdb20$7988c741@einstein>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Ibrahim,

Unfortunately your Microsoft OS (MOS) log shows that your modem is of
the  Winmodem type (see <<<<), for which there have not as yet been
provided and drivers.  Search for USROBO*.INF under MOS, and get some
more detailed information.  Unhappily, it will not work under Linux at
this time. The 3com56.rpm kit is just a configuration utility, and does
NOT by itself provide a Winmodem driver.  

MarvS
================================
02-19-2001 17:49:49.43 - U.S. Robotics 56K Voice Internal PCI in use.
02-19-2001 17:49:49.45 - Modem type: U.S. Robotics 56K Voice Internal
PCI
02-19-2001 17:49:49.45 - Modem inf path: USROBO~1.INF <<<<
02-19-2001 17:49:49.45 - Modem inf section: Winmodem <<<<<
02-19-2001 17:49:51.72 - 115200,N,8,1
02-19-2001 17:49:51.76 - 115200,N,8,1
02-19-2001 17:49:51.76 - Initializing modem.
02-19-2001 17:49:51.76 - Send: AT<cr>
02-19-2001 17:49:51.97 - Recv: AT<cr>
02-19-2001 17:49:51.97 - Recv: <cr><lf>OK<cr><lf>
02-19-2001 17:49:51.97 - Interpreted response: Ok
02-19-2001 17:49:51.97 - Send: AT&F1E0Q0V1&C1&D2S0=0<cr>
02-19-2001 17:49:52.02 - Recv: AT&F1E0Q0V1&C1&D2S0=0<cr>
02-19-2001 17:49:52.02 - Recv: <cr><lf>OK<cr><lf>
02-19-2001 17:49:52.02 - Interpreted response: Ok
02-19-2001 17:49:52.02 - Send: ATS7=50S19=0L2M1&M4&K1&H1&R2&I0B0X3<cr>
02-19-2001 17:49:52.07 - Recv: <cr><lf>OK<cr><lf>
02-19-2001 17:49:52.07 - Interpreted response: Ok
02-19-2001 17:49:52.07 - Send: ATs11=50<cr>
02-19-2001 17:49:52.12 - Recv: <cr><lf>OK<cr><lf>
02-19-2001 17:49:52.12 - Interpreted response: Ok
02-19-2001 17:49:52.12 - Dialing.
02-19-2001 17:49:52.12 - Send: ATDT#######<cr>
02-19-2001 17:50:22.97 - Recv: <cr><lf>CONNECT
33600/ARQ/V34/LAPM/V42BIS<cr><lf>
02-19-2001 17:50:22.97 - Interpreted response: Connect
02-19-2001 17:50:22.97 - Connection established at 33600bps.
02-19-2001 17:50:22.97 - Error-control on.
02-19-2001 17:50:22.97 - Data compression on.
02-19-2001 18:03:35.77 - Hanging up the modem.
02-19-2001 18:03:35.77 - Hardware hangup by lowering DTR.
02-19-2001 18:03:36.97 - WARNING: The modem did not respond to lowering
DTR.  Trying software hangup...
02-19-2001 18:03:36.97 - Send: +++
02-19-2001 18:03:37.08 - Recv: <cr><lf>NO CARRIER<cr><lf>
02-19-2001 18:03:37.08 - Interpreted response: No Carrier



 El-Shafei wrote:
> 
> xingguo chen and Marvin,
> I have SuSE Linux, Kernel 2.4, Mother Board Asus P2V AGP, and 3COM PCI Modem
> [Chip #2448].
> I downloaded the 3comMdm.rpm that works under RH, and I installed it. It
> created a file called "serial.conf" and I modified the script
> /sbin/init.d/serial by appending the configuration that comes with this
> program with the original SuSE configuration.
> 
> and I finally it didn't work.
> 
> I attahced manythe following files:
> 1. /sbin/init.d/serial
> 2. serial.conf
> 3. the output of 'lspci'
> 4. an e-mail from vojtech pavlok
> 5. The modem log file from windows configuration.
> 
> Please check this files and if your have any comments inform me.
> 
> Thank you.
> 
> Yours,
> Ibrahim El-Shafei
> ----- Original Message -----
> From: "Marvin Stodolsky" <stodolsk@rcn.com>
> To: "xingguo chen" <singo29@yahoo.com>; "LinModems" <discuss@linmodems.org>
> Sent: Friday, March 02, 2001 3:41 AM
> Subject: Re: modem
> 
> > xingguo chen
> >
> > My System is Debian rather than Redhat, and I don't have that modem.
> > But the relevant command I believe is
> > >   rpm -i 3com56k.rpm
> > The package does not appear to contain a driver, but rather a binary for
> > inspecting hardware, and setting it up.  Presumable it uses the standard
> > serial drivers and port /dev/ttyS3
> >
> > List,
> > Do any of you have relevant experience?
> >
> > marvS
> >
> > =============
> >  wrote:
> > >
> > > Dear Marvin,
> > > I got the driver. if you have some step-by step
> > > instruction can share with me, that will help a lot.
> > > thanks.
> > > Xing G Chen
> > >
> > > Marvin Stodolsky
> > > Date: Sat, 24 Feb 2001 07:31:42 -0500
> > >
> >
> > --------------------------------------------------------------------------
> ------
> > >
> > > > Athail Rangel Pulino Filho wrote:
> > > >
> > > > I have a desktop Dell Dimension L733r. It seems that
> > > the modem is 3Com
> > > > MDP3900V-U modem. I have a driver (3com56k.rpm) sent
> > > to me by Dell
> > > > Computers.
> > > > Unfortunatelly I don't know how to use this driver
> > > in Linux (Red Hat
> > > > 7.0).
> > >
> > > =====
> > > Xingguo Chen
> > > TEL:(408)871-0872
> > > entrego.com
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Get email at your own domain with Yahoo! Mail.
> > > http://personal.mail.yahoo.com/
> 
>   ------------------------------------------------------------------------
>                   Name: serial.conf
>    serial.conf    Type: unspecified type (application/octet-stream)
>               Encoding: quoted-printable
> 
>              Name: SERIAL
>    SERIAL    Type: unspecified type (application/octet-stream)
>          Encoding: quoted-printable
> 
>                                                Name: U.S. Robotics 56K Voice Internal PCI.log
>    U.S. Robotics 56K Voice Internal PCI.log    Type: unspecified type (application/octet-stream)
>                                            Encoding: quoted-printable
> 
>                                                                  Name: patch support for 3Com PCI modem + Generic PCI serials.txt
>    patch support for 3Com PCI modem + Generic PCI serials.txt    Type: Plain Text (text/plain)
>                                                              Encoding: quoted-printable
> 
>                 Name: lspci.log
>    lspci.log    Type: unspecified type (application/octet-stream)
>             Encoding: quoted-printable
Webmaster: Russell Nelson
Last modified: Wed Jul 30 11:02:43 EDT 2003