Linmodems Mailing list Archives
Return-Path: <marvin.stodolsky@gmail.com>
Mailing-List: contact discuss-help@linmodems.org; run by ezmlm
Delivered-To: mailing list discuss@linmodems.org
Received: (qmail 24234 invoked from network); 21 Jun 2008 17:25:54 -0000
Received: from wf-out-1314.google.com (209.85.200.175)
by pdam.crynwr.com with SMTP; 21 Jun 2008 17:25:54 -0000
Received: by wf-out-1314.google.com with SMTP id 24so1472909wfg.15
for <discuss@linmodems.org>; Sat, 21 Jun 2008 10:25:52 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
d=gmail.com; s=gamma;
h=domainkey-signature:received:received:message-id:date:from:to
:subject:cc:in-reply-to:mime-version:content-type
:content-transfer-encoding:content-disposition:references;
bh=8Qk/HcNJbk4e/5Xm5Sr1JBjg0Dqrxaeki+nR6tcEssE=;
b=ssUBRj651H9TewUPFDt0Ao3ievcVNveFFylp+od6QY2Y7T2GmaE7z4aoUzxmnY0ZCp
1ekZ4a4OoDwseY5B2cSpphMjLx1GTJ5nS6PjVG8/tB9guTYsc2C21YVhhX8ozAoAoAlp
CsoT/FT1xTyGC4wIvBfY5bPw5cDhaMZ4iPKig=
DomainKey-Signature: a=rsa-sha1; c=nofws;
d=gmail.com; s=gamma;
h=message-id:date:from:to:subject:cc:in-reply-to:mime-version
:content-type:content-transfer-encoding:content-disposition
:references;
b=aPEMaLhq81IBKKwhXXjKMFwwz91Uucd0OwucAImLg198hSeZ6RvPJPsWZx9NWnxclJ
h5HUCAKb49S8uDTm+TYox9AhsLRYgFsKrfXnUJON9kmnLfFUYTE7GBc93jebaFXysZCe
ZXJH8oD1XoWnYeeqRns5Xyho0rkEVUreBEKsE=
Received: by 10.142.177.7 with SMTP id z7mr2431603wfe.249.1214069152666;
Sat, 21 Jun 2008 10:25:52 -0700 (PDT)
Received: by 10.150.158.16 with HTTP; Sat, 21 Jun 2008 10:25:52 -0700 (PDT)
Message-ID: <c27106ee0806211025w6e2aff90gdeab15991c88a6a6@mail.gmail.com>
Date: Sat, 21 Jun 2008 13:25:52 -0400
From: "Marvin Stodolsky" <marvin.stodolsky@gmail.com>
To: donato <donato.raimondi@libero.it>
Subject: Re: winmodem
Cc: discuss@linmodems.org
In-Reply-To: <1214046727.6071.4.camel@portatile>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
References: <1214046727.6071.4.camel@portatile>
Donato,
There is archival data
Primary device ID: 8086:266d
Subsystem PCI_id 103c:3081
Softmodem codec or chipset from diagnostics:
from Archives: SIL27, an LSI/AgereSystems type
Implying that there is in principle support under
Linux version 2.6.24-19-generic
through:
----------
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.2.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
--------
But there is first the PRIMARY problem:
Modem interrupt assignment and sharing:
18: 18716 IO-APIC-fasteoi ipw2200, eth0
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
[ 9.570806] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level,
low) -> IRQ 18
[ 9.570817] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
The "disabled" has to be cured before the 8086:266d modem card can be
responsive.
Also scanModem quit to early. Please run in the folder with scanModem
$ bash -x ./scanModem 2>&1 tee | donato.txt
and send me the donato.txt
Also
$ lsmod > lsmod.txt
and send the lsmod.txt
Are you using ethernet? Shotting down eth0 may help.
MarvS
2008/6/21 donato <donato.raimondi@libero.it>:
> copia del mio modem
>
> donato
>
> CPU0
> 0: 70238 IO-APIC-edge timer
> 1: 442 IO-APIC-edge i8042
> 8: 30 IO-APIC-edge rtc
> 9: 4067 IO-APIC-fasteoi acpi
> 12: 45353 IO-APIC-edge i8042
> 14: 35332 IO-APIC-edge libata
> 15: 0 IO-APIC-edge libata
> 16: 3255 IO-APIC-fasteoi Intel ICH6
> 17: 1 IO-APIC-fasteoi yenta, tifm_7xx1, sdhci:slot0, sdhci:slot1, sdhci:slot2
> 18: 18717 IO-APIC-fasteoi ipw2200, eth0
> 19: 2 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
> 20: 120641 IO-APIC-fasteoi uhci_hcd:usb2
> 21: 0 IO-APIC-fasteoi uhci_hcd:usb3
> 22: 0 IO-APIC-fasteoi uhci_hcd:usb4, i915@pci:0000:00:02.0
> 23: 3 IO-APIC-fasteoi ohci1394
> NMI: 0 Non-maskable interrupts
> LOC: 27905 Local timer interrupts
> RES: 0 Rescheduling interrupts
> CAL: 0 function call interrupts
> TLB: 0 TLB shootdowns
> TRM: 0 Thermal event interrupts
> SPU: 0 Spurious interrupts
> ERR: 0
> MIS: 0
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008 (Ubuntu 2.6.24-19.33-generic)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
> [ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6eb000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000003f6eb000 - 000000003f700000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> [ 0.000000] 118MB HIGHMEM available.
> [ 0.000000] 896MB LOWMEM available.
> [ 0.000000] Entering add_active_range(0, 0, 259808) 0 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 229376
> [ 0.000000] HighMem 229376 -> 259808
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 259808
> [ 0.000000] On node 0 totalpages: 259808
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1760 pages used for memmap
> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 237 pages used for memmap
> [ 0.000000] HighMem zone: 30195 pages, LIFO batch:7
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP signature @ 0xC00F76F0 checksum 0
> [ 0.000000] ACPI: RSDP 000F76F0, 0014 (r0 HP )
> [ 0.000000] ACPI: RSDT 3F6E5131, 0044 (r1 HP 09BC 6040000 LTP 0)
> [ 0.000000] ACPI: FACP 3F6EAE88, 0074 (r1 HP 09BC 6040000 LOHR 5F)
> [ 0.000000] ACPI: DSDT 3F6E59D6, 54B2 (r1 HP 09BC 6040000 MSFT 100000E)
> [ 0.000000] ACPI: FACS 3F6FBFC0, 0040
> [ 0.000000] ACPI: APIC 3F6EAEFC, 0068 (r1 HP 09BC 6040000 LOHR 5F)
> [ 0.000000] ACPI: BOOT 3F6EAFD8, 0028 (r1 HP 09BC 6040000 LTP 1)
> [ 0.000000] ACPI: MCFG 3F6EAF9C, 003C (r1 HP 09BC 6040000 LOHR 5F)
> [ 0.000000] ACPI: SSDT 3F6E558D, 0235 (r1 HP 09BC 3000 INTL 20030224)
> [ 0.000000] ACPI: SSDT 3F6E53B5, 01D8 (r1 HP 09BC 3001 INTL 20030224)
> [ 0.000000] ACPI: SSDT 3F6E52A1, 0114 (r1 HP 09BC 3000 INTL 20030224)
> [ 0.000000] ACPI: SSDT 3F6E5175, 012C (r1 HP 09BC 1 INTL 20030224)
> [ 0.000000] ACPI: DMI detected: Hewlett-Packard
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 6:13 APIC version 20
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
> [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
> [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
> [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257779
> [ 0.000000] Kernel command line: root=UUID=99a09c00-f525-4705-9464-99584b8133d1 ro quiet splash locale=it_IT
> [ 0.000000] mapped APIC to ffffb000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] Detected 1596.475 MHz processor.
> [ 7.541540] Console: colour VGA+ 80x25
> [ 7.541544] console [tty0] enabled
> [ 7.541916] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 7.542395] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 7.575495] Memory: 1017708k/1039232k available (2177k kernel code, 20784k reserved, 1006k data, 368k init, 121728k highmem)
> [ 7.575503] virtual kernel memory layout:
> [ 7.575505] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
> [ 7.575506] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 7.575507] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> [ 7.575509] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> [ 7.575510] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
> [ 7.575511] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
> [ 7.575513] .text : 0xc0100000 - 0xc0320434 (2177 kB)
> [ 7.575516] Checking if this processor honours the WP bit even in supervisor mode... Ok.
> [ 7.575557] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
> [ 7.655538] Calibrating delay using timer specific routine.. 3196.51 BogoMIPS (lpj=6393028)
> [ 7.655568] Security Framework initialized
> [ 7.655576] SELinux: Disabled at boot.
> [ 7.655593] AppArmor: AppArmor initialized
> [ 7.655597] Failure registering capabilities with primary security module.
> [ 7.655605] Mount-cache hash table entries: 512
> [ 7.655736] Initializing cgroup subsys ns
> [ 7.655741] Initializing cgroup subsys cpuacct
> [ 7.655755] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
> [ 7.655767] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 7.655769] CPU: L2 cache: 2048K
> [ 7.655772] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
> [ 7.655782] Compat vDSO mapped to ffffe000.
> [ 7.655796] Checking 'hlt' instruction... OK.
> [ 7.671944] SMP alternatives: switching to UP code
> [ 7.673958] Freeing SMP alternatives: 11k freed
> [ 7.674069] Early unpacking initramfs... done
> [ 8.074690] ACPI: Core revision 20070126
> [ 8.074764] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
> [ 8.101390] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
> [ 8.101417] Total of 1 processors activated (3196.51 BogoMIPS).
> [ 8.101607] ENABLING IO-APIC IRQs
> [ 8.101797] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 8.247248] Brought up 1 CPUs
> [ 8.247278] CPU0 attaching sched-domain:
> [ 8.247281] domain 0: span 01
> [ 8.247283] groups: 01
> [ 8.247453] net_namespace: 64 bytes
> [ 8.247463] Booting paravirtualized kernel on bare hardware
> [ 8.247950] Time: 17:36:10 Date: 06/19/08
> [ 8.247976] NET: Registered protocol family 16
> [ 8.248173] EISA bus registered
> [ 8.248200] ACPI: bus type pci registered
> [ 8.248714] PCI: PCI BIOS revision 2.10 entry at 0xfd850, last bus=7
> [ 8.248717] PCI: Using configuration type 1
> [ 8.248733] Setting up standard PCI resources
> [ 8.258059] ACPI: EC: Look up EC in DSDT
> [ 8.259458] ACPI: Interpreter enabled
> [ 8.259462] ACPI: (supports S0 S3 S4 S5)
> [ 8.259476] ACPI: Using IOAPIC for interrupt routing
> [ 8.261913] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 8.264123] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
> [ 8.264128] ACPI: EC: driver started in interrupt mode
> [ 8.264170] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 8.264904] Force enabled HPET at base address 0xfed00000
> [ 8.264911] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> [ 8.264915] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
> [ 8.265667] PCI: Transparent bridge - 0000:00:1e.0
> [ 8.265748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 8.265989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 8.266124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [ 8.268432] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [ 8.268522] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [ 8.268610] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> [ 8.268697] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> [ 8.268783] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> [ 8.268870] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> [ 8.268956] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
> [ 8.269042] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> [ 8.269160] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 8.269193] pnp: PnP ACPI init
> [ 8.269200] ACPI: bus type pnp registered
> [ 8.271186] pnp: PnP ACPI: found 8 devices
> [ 8.271189] ACPI: ACPI bus type pnp unregistered
> [ 8.271218] PnPBIOS: Disabled by ACPI PNP
> [ 8.271496] PCI: Using ACPI for IRQ routing
> [ 8.271499] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> [ 8.271503] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
> [ 8.271505] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
> [ 8.271508] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
> [ 8.307176] NET: Registered protocol family 8
> [ 8.307179] NET: Registered protocol family 20
> [ 8.307346] hpet clockevent registered
> [ 8.307352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 8.307357] hpet0: 3 64-bit timers, 14318180 Hz
> [ 8.308393] AppArmor: AppArmor Filesystem Enabled
> [ 8.311167] Time: tsc clocksource has been installed.
> [ 8.319201] system 00:04: ioport range 0x200-0x20f has been reserved
> [ 8.319204] system 00:04: ioport range 0x800-0x80f has been reserved
> [ 8.319208] system 00:04: ioport range 0x1000-0x107f has been reserved
> [ 8.319211] system 00:04: ioport range 0x1180-0x11bf has been reserved
> [ 8.319214] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
> [ 8.319218] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
> [ 8.319221] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
> [ 8.319224] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
> [ 8.319228] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
> [ 8.319231] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved
> [ 8.349642] PCI: Bridge: 0000:00:1c.0
> [ 8.349644] IO window: disabled.
> [ 8.349649] MEM window: disabled.
> [ 8.349653] PREFETCH window: disabled.
> [ 8.349662] PCI: Bus 7, cardbus bridge: 0000:06:06.0
> [ 8.349665] IO window: 00003400-000034ff
> [ 8.349670] IO window: 00003800-000038ff
> [ 8.349675] PREFETCH window: 54000000-57ffffff
> [ 8.349680] MEM window: 58000000-5bffffff
> [ 8.349686] PCI: Bridge: 0000:00:1e.0
> [ 8.349689] IO window: 3000-3fff
> [ 8.349695] MEM window: b0100000-b01fffff
> [ 8.349699] PREFETCH window: disabled.
> [ 8.349729] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
> [ 8.349737] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 8.349750] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [ 8.349767] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 17
> [ 8.349774] PCI: Setting latency timer of device 0000:06:06.0 to 64
> [ 8.349785] NET: Registered protocol family 2
> [ 8.387185] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 8.387427] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 8.388318] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 8.388895] TCP: Hash tables configured (established 131072 bind 65536)
> [ 8.388899] TCP reno registered
> [ 8.399283] checking if image is initramfs... it is
> [ 8.810874] Switched to high resolution mode on CPU 0
> [ 9.183606] Freeing initrd memory: 7712k freed
> [ 9.183854] Simple Boot Flag at 0x36 set to 0x1
> [ 9.184299] audit: initializing netlink socket (disabled)
> [ 9.184316] audit(1213896970.484:1): initialized
> [ 9.184506] highmem bounce pool size: 64 pages
> [ 9.186524] VFS: Disk quotas dquot_6.5.1
> [ 9.186630] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 9.186787] io scheduler noop registered
> [ 9.186789] io scheduler anticipatory registered
> [ 9.186791] io scheduler deadline registered
> [ 9.186804] io scheduler cfq registered (default)
> [ 9.186819] Boot video device is 0000:00:02.0
> [ 9.187029] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 9.187082] assign_interrupt_mode Found MSI capability
> [ 9.187130] Allocate Port Service[0000:00:1c.0:pcie00]
> [ 9.187172] Allocate Port Service[0000:00:1c.0:pcie02]
> [ 9.187438] isapnp: Scanning for PnP cards...
> [ 9.541434] isapnp: No Plug & Play device found
> [ 9.569857] Real Time Clock Driver v1.12ac
> [ 9.569972] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [ 9.570806] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
> [ 9.570817] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
> [ 9.571456] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [ 9.571531] input: Macintosh mouse button emulation as /devices/virtual/input/input0
> [ 9.571628] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 9.577390] i8042.c: Detected active multiplexing controller, rev 1.1.
> [ 9.580556] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 9.580560] serio: i8042 AUX0 port at 0x60,0x64 irq 12
> [ 9.580563] serio: i8042 AUX1 port at 0x60,0x64 irq 12
> [ 9.580565] serio: i8042 AUX2 port at 0x60,0x64 irq 12
> [ 9.580568] serio: i8042 AUX3 port at 0x60,0x64 irq 12
> [ 9.582362] mice: PS/2 mouse device common for all mice
> [ 9.582485] EISA: Probing bus 0 at eisa.0
> [ 9.582492] Cannot allocate resource for EISA slot 1
> [ 9.582495] Cannot allocate resource for EISA slot 2
> [ 9.582497] Cannot allocate resource for EISA slot 3
> [ 9.582518] EISA: Detected 0 cards.
> [ 9.582522] cpuidle: using governor ladder
> [ 9.582524] cpuidle: using governor menu
> [ 9.582623] NET: Registered protocol family 1
> [ 9.582653] Using IPI No-Shortcut mode
> [ 9.582690] registered taskstats version 1
> [ 9.582811] Magic number: 12:810:643
> [ 9.582909] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [ 9.582911] EDD information not available.
> [ 9.583125] Freeing unused kernel memory: 368k freed
> [ 9.610275] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
> [ 10.026436] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
> [ 10.226333] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
> [ 10.426143] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
> [ 10.626039] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
> [ 10.815063] fuse init (API version 7.9)
> [ 10.836286] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
> [ 10.839152] ACPI: Thermal Zone [THR0] (36 C)
> [ 10.840416] ACPI: Invalid passive threshold
> [ 10.840846] ACPI: Thermal Zone [THR1] (31 C)
> [ 11.483620] usbcore: registered new interface driver usbfs
> [ 11.483649] usbcore: registered new interface driver hub
> [ 11.493371] usbcore: registered new device driver usb
> [ 11.503733] USB Universal Host Controller Interface driver v3.0
> [ 11.503803] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
> [ 11.503816] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [ 11.503821] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 11.504178] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 11.504211] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
> [ 11.504355] usb usb1: configuration #1 chosen from 1 choice
> [ 11.504379] hub 1-0:1.0: USB hub found
> [ 11.504386] hub 1-0:1.0: 2 ports detected
> [ 11.604980] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
> [ 11.604994] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [ 11.604999] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 11.605024] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> [ 11.605056] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
> [ 11.605175] usb usb2: configuration #1 chosen from 1 choice
> [ 11.605199] hub 2-0:1.0: USB hub found
> [ 11.605205] hub 2-0:1.0: 2 ports detected
> [ 11.652837] 8139too Fast Ethernet driver 0.9.28
> [ 11.704590] SCSI subsystem initialized
> [ 11.713095] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
> [ 11.713110] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [ 11.713115] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 11.713138] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> [ 11.713170] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
> [ 11.713295] usb usb3: configuration #1 chosen from 1 choice
> [ 11.713319] hub 3-0:1.0: USB hub found
> [ 11.713325] hub 3-0:1.0: 2 ports detected
> [ 11.760758] libata version 3.00 loaded.
> [ 11.816835] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 22
> [ 11.816849] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 11.816854] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 11.816877] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> [ 11.816911] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880
> [ 11.817026] usb usb4: configuration #1 chosen from 1 choice
> [ 11.817050] hub 4-0:1.0: USB hub found
> [ 11.817056] hub 4-0:1.0: 2 ports detected
> [ 11.920855] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
> [ 11.920871] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [ 11.920875] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 11.920900] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> [ 11.924818] ehci_hcd 0000:00:1d.7: debug port 1
> [ 11.924824] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> [ 11.924832] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000
> [ 11.952621] usb 2-1: new full speed USB device using uhci_hcd and address 2
> [ 11.964607] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 11.964739] usb usb5: configuration #1 chosen from 1 choice
> [ 11.964766] hub 5-0:1.0: USB hub found
> [ 11.964772] hub 5-0:1.0: 8 ports detected
> [ 12.068759] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
> [ 12.069632] eth0: RealTek RTL8139 at 0x3000, 00:0a:e4:d1:bc:ca, IRQ 18
> [ 12.069635] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> [ 12.071582] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23
> [ 12.121361] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0108000-b01087ff] Max Packet=[2048] IR/IT contexts=[4/8]
> [ 12.122820] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> [ 12.124673] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
> [ 12.124708] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 12.124721] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
> [ 12.129312] ata_piix 0000:00:1f.1: version 2.12
> [ 12.129324] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
> [ 12.129354] PCI: Setting latency timer of device 0000:00:1f.1 to 64
> [ 12.130288] scsi0 : ata_piix
> [ 12.130800] scsi1 : ata_piix
> [ 12.131349] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
> [ 12.131353] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
> [ 12.456950] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100
> [ 12.456955] ata1.00: 156301488 sectors, multi 16: LBA
> [ 12.456984] ata1.01: ATAPI: HL-DT-ST DVD-RW GCA-4080N, 0C35, max MWDMA2
> [ 12.472717] ata1.00: configured for UDMA/100
> [ 12.568186] usb 2-1: new full speed USB device using uhci_hcd and address 3
> [ 12.644504] ata1.01: configured for MWDMA2
> [ 12.644551] ata2: port disabled. ignoring.
> [ 12.644691] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5
> [ 12.645330] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RW GCA-4080N 0C35 PQ: 0 ANSI: 5
> [ 12.659597] Driver 'sd' needs updating - please use bus_type methods
> [ 12.659676] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> [ 12.659690] sd 0:0:0:0: [sda] Write Protect is off
> [ 12.659692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 12.659709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 12.659759] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> [ 12.659770] sd 0:0:0:0: [sda] Write Protect is off
> [ 12.659772] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 12.659788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 12.659792] sda:<4>Driver 'sr' needs updating - please use bus_type methods
> [ 12.673428] sda1 sda2 < sda5 >
> [ 12.674981] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 12.680958] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 12.680980] sr 0:0:1:0: Attached scsi generic sg1 type 5
> [ 12.696811] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> [ 12.696815] Uniform CD-ROM driver Revision: 3.20
> [ 12.696865] sr 0:0:1:0: Attached scsi CD-ROM sr0
> [ 12.725956] usb 2-1: configuration #1 chosen from 1 choice
> [ 12.804014] Clocksource tsc unstable (delta = -21056473719 ns)
> [ 12.808008] Time: hpet clocksource has been installed.
> [ 12.831723] Attempting manual resume
> [ 12.831726] swsusp: Resume From Partition 8:5
> [ 12.831728] PM: Checking swsusp image.
> [ 12.831879] PM: Resume from disk failed.
> [ 12.848760] kjournald starting. Commit interval 5 seconds
> [ 12.848768] EXT3-fs: mounted filesystem with ordered data mode.
> [ 12.900597] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a000a2a5017]
> [ 16.795908] Linux agpgart interface v0.102
> [ 16.895912] input: PC Speaker as /devices/platform/pcspkr/input/input2
> [ 16.963805] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 17.027788] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 17.211608] intel_rng: FWH not detected
> [ 17.251625] agpgart: Detected an Intel 915GM Chipset.
> [ 17.252105] agpgart: Detected 7932K stolen memory.
> [ 17.269369] agpgart: AGP aperture is 256M @ 0xc0000000
> [ 17.569884] input: Power Button (FF) as /devices/virtual/input/input3
> [ 17.595364] ACPI: Power Button (FF) [PWRF]
> [ 17.595438] input: Lid Switch as /devices/virtual/input/input4
> [ 17.608137] ACPI: Lid Switch [LID0]
> [ 17.608217] input: Sleep Button (CM) as /devices/virtual/input/input5
> [ 17.608251] iTCO_vendor_support: vendor-support=0
> [ 17.635340] ACPI: Sleep Button (CM) [SLPB]
> [ 17.635413] input: Power Button (CM) as /devices/virtual/input/input6
> [ 17.663321] ACPI: Power Button (CM) [PWB]
> [ 17.663887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
> [ 17.663965] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
> [ 17.663999] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 17.735387] ACPI: WMI-Acer: Mapper loaded
> [ 18.110718] ieee80211_crypt: registered algorithm 'NULL'
> [ 18.269870] ieee80211: 802.11 data/management/control stack, git-1.1.13
> [ 18.269875] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
> [ 18.503291] Yenta: CardBus bridge found at 0000:06:06.0 [103c:3081]
> [ 18.503315] Yenta: Enabling burst memory read transactions
> [ 18.503321] Yenta: Using CSCINT to route CSC interrupts to PCI
> [ 18.503323] Yenta: Routing CardBus interrupts to PCI
> [ 18.503329] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64
> [ 18.682587] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
> [ 18.682591] ipw2200: Copyright(c) 2003-2006 Intel Corporation
> [ 18.739325] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
> [ 18.739330] Socket status: 30000006
> [ 18.739333] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
> [ 18.739339] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
> [ 18.739342] cs: IO port probe 0x3000-0x3fff: clean.
> [ 18.739598] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
> [ 18.778741] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 17
> [ 18.778849] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 18
> [ 18.819080] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
> [ 18.842473] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> [ 18.854445] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
> [ 19.007356] sdhci: Secure Digital Host Controller Interface driver
> [ 19.007361] sdhci: Copyright(c) Pierre Ossman
> [ 19.186684] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
> [ 19.386587] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
> [ 19.870498] input: PS/2 Mouse as /devices/virtual/input/input8
> [ 19.919179] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
> [ 20.017742] ACPI: AC Adapter [AC] (on-line)
> [ 20.144482] ACPI: Battery Slot [BAT0] (battery present)
> [ 20.342099] Bluetooth: Core ver 2.11
> [ 20.344057] NET: Registered protocol family 31
> [ 20.344060] Bluetooth: HCI device and connection manager initialized
> [ 20.344064] Bluetooth: HCI socket layer initialized
> [ 20.362163] Bluetooth: HCI USB driver ver 2.9
> [ 20.364301] usbcore: registered new interface driver hci_usb
> [ 21.510610] cs: IO port probe 0x100-0x3af: clean.
> [ 21.512277] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
> [ 21.513012] cs: IO port probe 0x820-0x8ff: clean.
> [ 21.513609] cs: IO port probe 0xc00-0xcf7: clean.
> [ 21.514363] cs: IO port probe 0xa00-0xaff: clean.
> [ 21.547312] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
> [ 21.547340] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
> [ 21.547364] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 17
> [ 21.547390] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 21.547433] mmc0: SDHCI at 0xb0109000 irq 17 DMA
> [ 21.547444] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 21.547472] mmc1: SDHCI at 0xb0108c00 irq 17 DMA
> [ 21.547482] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
> [ 21.547509] mmc2: SDHCI at 0xb0108800 irq 17 DMA
> [ 21.552581] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
> [ 21.552598] PCI: Setting latency timer of device 0000:00:1e.2 to 64
> [ 21.698655] intel8x0_measure_ac97_clock: measured 55481 usecs
> [ 21.698660] intel8x0: clocking to 48000
> [ 21.806577] lp: driver loaded but no devices found
> [ 22.005712] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k
> [ 22.092230] EXT3 FS on sda1, internal journal
> [ 22.150353] device-mapper: uevent: version 1.0.3
> [ 22.150385] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
> [ 22.586099] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 22.894385] No dock devices found.
> [ 23.587133] ppdev: user-space parallel port driver
> [ 23.610246] audit(1213897022.109:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5019 profile="/usr/sbin/cupsd" namespace="default"
> [ 23.644339] apm: BIOS not found.
> [ 52.229754] Marking TSC unstable due to: cpufreq changes.
> [ 40.132045] eth0: link down
> [ 26.872814] Bluetooth: L2CAP ver 2.9
> [ 26.872819] Bluetooth: L2CAP socket layer initialized
> [ 53.882443] Bluetooth: RFCOMM socket layer initialized
> [ 53.882464] Bluetooth: RFCOMM TTY layer initialized
> [ 53.882469] Bluetooth: RFCOMM ver 1.8
> [ 34.707448] [drm] Initialized drm 1.1.0 20060810
> [ 34.711639] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22
> [ 34.711648] PCI: Setting latency timer of device 0000:00:02.0 to 64
> [ 34.711727] [drm] Initialized i915 1.6.0 20060119 on minor 0
> [ 65.809875] NET: Registered protocol family 10
> [ 65.810608] lo: Disabled Privacy Extensions
> [ 65.811567] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 70.256997] eth1: no IPv6 routers present
> [ 35.407573] NET: Registered protocol family 17
> [ 35.568185] ieee80211_crypt: registered algorithm 'TKIP'
> [ 39.030851] eth1: no IPv6 routers present
>
> Only plain text email is forwarded by the Discuss@Linmodems.org List Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.24-19-generic
> With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup service.
> Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.24-19-generic (buildd@vernadsky) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008
> scanModem update of: 2008_06_17
>
> There are no blacklisted modem drivers in /etc/modprobe* files
> Attached USB devices are:
> ID 03f0:011d Hewlett-Packard
>
> USB modems not recognized
>
> For candidate card in slot 00:1e.3, firmware information and bootup diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1e.3 8086:266d 103c:3081 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
>
> Modem interrupt assignment and sharing:
> 18: 18716 IO-APIC-fasteoi ipw2200, eth0
> --- Bootup diagnostics for card in PCI slot 00:1e.3 ----
> [ 9.570806] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
> [ 9.570817] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>
> The PCI slot 00:1e.3 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
> Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
> if help is needed.
>
>
>
>
Webmaster: Russell Nelson
Last modified: Wed Jul 30 11:02:43 EDT 2003