Linmodems Mailing list Archives

	Web archives.linmodems.org

Return-Path: <j.stifter@medres.ch>
Mailing-List: contact discuss-help@linmodems.org; run by ezmlm
Delivered-To: mailing list discuss@linmodems.org
Received: (qmail 8259 invoked from network); 22 Jun 2001 12:24:02 -0000
Received: from unknown (HELO caramel.medres.ch) (212.254.210.225)
  by www.linmodems.org with SMTP; 22 Jun 2001 12:24:02 -0000
Received: (qmail 16201 invoked by uid 1004); 22 Jun 2001 12:31:06 -0000
Received: from j.stifter@medres.ch by caramel with scan4virus-0.19 (uvscan: v4.0.70/v4144. sweep: 1.12/3.39. . Clean. Processed in 1.191349 secs); 22/06/2001 14:31:05
Received: from unknown (HELO poseidon.medres-intra.ch) (192.168.0.200)
  by caramel.medres.ch with SMTP; 22 Jun 2001 12:31:05 -0000
From: Jan Stifter <j.stifter@medres.ch>
To: "Adam Bull" <adam@bullgore.freeserve.co.uk>
Cc: <discuss@linmodems.org>
Subject: Re: HSP PCI Modem - NO DIALTONE
Date: Fri, 22 Jun 2001 14:23:36 +0200
Reply-To: j.stifter@medres.ch
Message-ID: <i3e6jtknkjhtn0s2l3177lbs4kj690oe78@4ax.com>
References: <002801c0fb12$0f7542a0$0fc986d9@oemcomputer>
In-Reply-To: <002801c0fb12$0f7542a0$0fc986d9@oemcomputer>
X-Mailer: Forte Agent 1.8/32.548
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

hmmm, this is interesting, i have almost the same modem at home, and
it works very nice.

did you check:
a) /dev/modem /dev/ttyS15 are correct ?
b) country_code settings?

hope it helps.
jan


On Fri, 22 Jun 2001 12:54:13 +0100, "Adam Bull"
<adam@bullgore.freeserve.co.uk> wrote:

>I have a PCTel PCI modem that identifies itself in Windows as "V.90 =
K56Flex
>HSP PCI Modem". The circuit board has the indentifier PCT789T.
>
>I've tried several different drivers, inclusing Jan's ones, but the only
>ones that seem to recgonise the modem at all are the ones at Zoltrix:
>
>http://www.zoltrix-int.com/support_html/PUBLIC/MODEM/linux/hsp56-linux.z=
ip
>
>However, the driver doesn't appear to be communication with the modem - =
I
>get a NO DIALTONE error after giving a number to dial. The IRQ is being
>detected correctly, so that's not the problem.
>
>Using Jan's drivers, the dialer gets as far as sending the =
initialization
>string (ATZ), but never recieves an OK.
>
>Using other drivers I've tried, the modem isn't recognized at all.
>
>
>
>