Linmodems Mailing list Archives

	Web archives.linmodems.org

Return-Path: <a.zeini@iranlaico.com>
Mailing-List: contact discuss-help@linmodems.org; run by ezmlm
Delivered-To: mailing list discuss@linmodems.org
Received: (qmail 15535 invoked from network); 23 Jun 2001 13:05:02 -0000
Received: from unknown (HELO inbound2.maa.sify.net) (202.144.76.8)
  by www.linmodems.org with SMTP; 23 Jun 2001 13:05:02 -0000
Received: (qmail 22961 invoked from network); 23 Jun 2001 13:04:14 -0000
Received: from unknown (HELO pashotan.iranlaico.com) (210.214.16.14)
  by inbound2.maa.sify.net with SMTP; 23 Jun 2001 13:04:14 -0000
Message-Id: <5.1.0.14.0.20010623180006.00a9f0a0@post.strato.de>
X-Sender: a.zeini%iranlaico.com@post.strato.de
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Date: Sat, 23 Jun 2001 18:07:05 +0530
To: <discuss@linmodems.org>
From: Arash Zeini <a.zeini@iranlaico.com>
Subject: Re: PCMCIA Question
In-Reply-To: <002f01c0fb6c$3d338440$b89737d2@server>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed

Hi,

If your question is directed to me, the result of '/sbin/cardctl ident' is:

Socket 0:
         product info: "Xircom", "CreditCard Ethernet 10/100 + Modem 56", 
"CEM56", "1.00"
         manfid: 0x0105, 0x110a
         function: 2 (serial)
Socket 1:
         no product info available

I don't get any special messages, except the fact that it gets recognized 
and the two peeps. It just works out of the box. I didn't need to install 
any drivers.

Good luck,
Arash

At 10:39 23.06.01 +1200, [MAS] Jack wrote:
>Hi,
>Which chipset is used in your PCMCIA modem? With the card inserted (!!!), 
>the Linux command /sbin/cardctl ident shows the ID's in the manfid line
>If I do this I get not the manfid line ...if I put the modem in the slot I 
>hear the beep noise and another one. It is regonised as LT Win Modem but 
>there is no manfid line.
>Can somebadoy give me a desription how I can get under Windows the comport 
>irq base address from the modem.
>I have still the same Problem as befor.
>the ati detection is working. The lt_modem ist forced.
>under Mandrake 8..
>do I need to  change or install some new pcmcia modules?
>thx for help..
>Jakob
>
>


Arash Zeini
--
http://www.linuxiran.org
http://www.farsikde.com